|
| |
|
| |
|
|
Technological stage of the gross superstructure of the apartment house in Prague - Dablice
Kucsera, Adam ; Kopecký, Lukáš (referee) ; Šlanhof, Jiří (advisor)
The work adresses the technological stage of the gross superstructure of the apartment house in Prague – Dablice. The house consist of reinforced concrete structure on the ground floor, three other floors in a brick form of pramic blocks Porotherm, ceilings above the second and third floor are composed of Spiroll prefabricated ceiling panel and roof structure is made up of gang nail trusses, thanks to this composition of house, it was necessary to address how to storage materials on the site, and also the arrival, departure and parking of vehicles. Technological regulativ is focused on concreting of the reinforced concrete monolithic framework.
|
|
|
Conceptual design of bridge crane 8 tonne
Franc, Šimon ; Pokorný, Přemysl (referee) ; Kubín, Martin (advisor)
This bachelor thesis deals with conceptual scheme of a bridge crane with carrying capacity of 8 tons. Intention of this thesis is to scheme out the main specifications and size of this bridge crane. First of all we design and calculate the main bridge girder. Afterwards we calculate and design the cross bars and the travelling wheels. At last the desigh of an electromotor for powering the movement of the bridge crane takes its place.
|
|
| |
|
|
Mobile Cranes Models Review
Jonák, Vojtěch ; Škopán, Miroslav (referee) ; Pokorný, Přemysl (advisor)
Bachelor’s thesis focuses on the comparison of mobile tower cranes. These cranes with a horizontal jib, which is located on the vertical tower, are usually self-erecting and have a chassis where can to move when are folded. The introduction gives a division according to a type of the chassis and a construction of the crane itself. Further, there are described the most important manufacturers of the cranes and their manufactured models. The tables show the comparison of different models or whole series of models in selected parameters.
|
|
|
Custom design for lifting equipment
Matějíčková, Eva ; Chladil, Josef (referee) ; Kalivoda, Milan (advisor)
The aim of this thesis is to design and manufacture a lifting device to the Volkswagen Crafter long vehicle. In the first part, I present a simple descriptive overview of different lifting devices based on their principle and use. Next, commercially available alternative solutions to the given problem are shown and discussed. The main goals of the practical part are the design of the lifting device that fits to a carriage van according to given specifications and the description of the technological processes for the manufacturing of individual components of the device. The design includes selection of proper machines, measuring devices and working tools, which was carried out based on the available equipment. Finally, manufacturing, testing and evaluation are described and discussed together with the possibilities for future improvement.
|
|
|
Handling system loads in foundry
Tvrdoň, Jan ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
This thesis deals with in the first part of the system of handling of loads in the operation of the foundry, which includes a brief description of the operation of the foundry, used material handling equipment for the transport of loads and risk analysis in their use with tasks commonly measures to avoid or minimize them. In the second part deals with the calculation of the strength of the sling. The work consists of technical reports and drawings.
|
|
|
Overhead travelling crane 125t
Peprník, Pavel ; Zimola, Lubomír (referee) ; Pokorný, Přemysl (advisor)
This diploma thesis deals with the assessment of drafted steel construction of overhead travelling crane by using finite element method. The crane’s lifting capacity is 125t/32t. It is going to be placed in hall of Slovácké strojírny, a. s. in Uherský Brod. Span of the crane is 25.8 meters, wheelbase is 6.7 meters and lifting height is 17 meters. My work contains analysis and assessment of crane construction with a load of fatigue according to ČSN 27 0103.
|
|
|
Construction technology study of the construction of the bearing structure of manufacturing plant in Jihlava
Pokorný, Jan ; Liška, Pavel (referee) ; Kovářová, Barbora (advisor)
Company engaged in modernization of locomotive vehicles progressively modernizing their industrial estate. A big investment become realization of new industrial hall for vehicle coating, simultaneously with a reconstruction of neighbouring production hall and a new connection to the water main, gas main and a new transformer station. The bachelor thesis includes technological regulations of bored piles and for assembly upper prefabricated reinforced concrete construction of coating hall. Technological regulations are supplemented by draft of the suitable machinery, equipment of construction site and inspectional and trial plans, work safety, time schedule and comparison of two variants of the cranes and all will be feasible in terms of construction rate and financing.
|
guest ::
